The Autel IM608 Pro II is a powerful smart key programmer for the 2019 Ford Explorer. Easily program new smart keys via OBD, ensuring efficient vehicle security. Perfect for IMMO programming needs.
Step-by-step guide on how to program a new smart key using Autel IM608 Pro II:
1. Connect the IM608 II to the OBD port of the vehicle.
2. Go to the IMMO section on the tablet and select "Accept."
3. Choose "Ford" from the options provided.
4. Select "Automatic selection" to let the device automatically detect the vehicle model.
5. Click on "Read" to retrieve information from the vehicle.
6. Confirm the prompt by selecting "OK."
7. Choose "Smart key" and then select "Yes" to proceed.
8. Perform an immo status scan and erase any existing codes if necessary.
9. Select "Add key" and click "Start" to begin the key programming process.
10. If the factory alarm of the vehicle is activated, deactivate it before learning the new keys.
Note: This procedure does not erase existing keys.
1. During the process, the instrument panel may temporarily turn black, which is normal.
2. Turn the ignition to the ON position or open and close the driver door once.
3. Wait for approximately 3-10 minutes for security access.
4. The device will display the number of learned keys (e.g., "Learned keys: 2").
5. Place the smart key that you want to program into one of the following locations:
- In the armrest box
- In the cup holder
- In the glove box
6. The device will prompt you to wait while it learns the key.
7. Once the learning process is complete, the device will indicate the current number of keys (e.g., "Current number of keys is 3").
8. If you have another key to program, press "Yes" to continue learning additional keys; otherwise, press "No" to complete the process.
Test the newly programmed key to ensure it functions properly.
Congratulations! You have successfully added a smart key to your 2019 Ford Explorer using the OBD method.