Free ShippingStandard Post Shipping Service, Estimated delivery time: 7-18 working days
Package Dimensions
26 x 22 x 8 cm; 1.25 Kilograms
Item Weight
1.25 kg
Returns
Return for refund within 30 days, buyer pays return shipping.
Product Description
Humzor P100 Plus Automotive Circuit Tester Automotive Power Circuit Probe Kit Electrical System Diagnostic Tool Features: -Find The Short Circuits: In most cases, a short circuit will manifest itself as a blown fuse or a tripped electrical protection device. Use the probe tip to activate and energise each fuse contact. The contact that trips the circuit breaker is the short circuit. -Find The Bad Ground: Use a probe tip to detect a suspected earth wire or contact. If the circuit breaker trips, the circuit is likely to be well grounded.
-Testing Trailer Lights: While the tool in DC Voltage mode, clip the auxiliary ground lead to the trailer ground , probe the contacts at the jack and then apply voltage to the probe tip. This lets you check the function and orientation of the connector and trailer lights.
-Check Continuity: While the tool is in Resistance mode, using the probe tip with chassis is ground or the auxiliary ground lead, continuity can be tested on wires and components attached or disconnected from the vehicle’s electrical system.
-Activating Component: The component activation function is used to generate activation signals to the component under test, such as activating lights, motors and other on-board electrical equipment.
-Signal Circuit Testing: Once you extract a DTC from the vehicle and realize that troubleshooting begins with some kind of sensor circuit, there is a quick test you can perform to verify the code. Testing your sensor is easy while using the tool.
-Voltage & Polarity Testing: When the tool is in DC voltage mode, touch the probe tip to the positive circuit. If the probe tip contacts an open circuit, neither LED will light.
Specifications:
Item name: Automotive Circuit Tester Model: P100 Plus DC voltage range: 0-65V Resistance range: 0-100 kΩ Rated current: 1-10 amps Frequency response of sound passage: 0Hz to 10Khz. 4 modes: DC voltage, AC voltage, Resistance, Diode. Three additional modes: MIN / MAX / audible monitoring. High voltage capability: displays up to 60 volts, 0.1 volt resolution. Total weight: about 1.3kg/2.86lb Package size: 26*22*8cm/10.23*8.66*3.14in
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 10-30mm.
Package List:
1* Automotive Circuit Tester, 1* Test Probe, 1* Test Connecting Wire, 1* Clamp,
1* Patch Cable, 1* Instruction Manual, 1* Packaging Toolbox. We are here for you:
