Accurate tire tread depth and brake disc wear analysis with 0.1mm accuracy.
No need to remove wheels, providing real-time measurements for instant analysis.
1.65" AMOLED display for easy navigation and data visualization.
Provides suggestions for tire and brake disc replacements, rotations, and alignments.
Autel TBE200 Laser Tire & Brake Examiner offers quick and precise tire tread depth and brake disc wear analysis, providing real-time measurement data and service recommendations for enhanced vehicle safety.
The Autel MaxiTPMS TBE200 (Tire Brake Examiner) revolutionizes tire and brake disc inspection by providing quick and precise wear measurements (measuring accuracy of 0.1 mm). This wand-like, laser-enabled device scans tire and brake disc surfaces to determine their condition and the need for service or replacement. With its 1.65-inch-high resolution Super Retina touchscreen AMOLED display, the TBE200 offers wear analysis and detailed service recommendations, including tire and brake disc replacement, tire rotation, and 4-wheel alignment.
1. 1.65" AMOLED super retina touchscreen
2. 1 Megapixel Macro Camera, 8 Megapixel Zoom Camera
3. Tire Tread Depth/ Brake Disc Wear Measurement
4. No Need To Remove The Wheel During Measurement
5. Laser Measurement with 0.1mm Accuracy
6. Real-Time Measurement Data on Touchscreen
7. Full Tread Measurement/ Quick Check
8. Measurement Data Curve Display/ Uneven Wear Analysis
9. Detailed Replacement & Maintenance Suggestions
10. Test Detail For Single Tire Tread/ Brake Disc
11. Tire Expiration Notice/ Tire Recall Lookup
12. Take Photos of Tire Wear & Damage
13. Calibration Plate Included
14. Compatible with Autel ITS600 To Get Comprehensive Test Report
Autel MaxiTPMS TBE200 is compatible with 99% of vehicle tires in the market, including:
All types of passenger cars
Commercial vehicles (trucks, heavy trucks, buses)
1. TIRE TREAD WEAR & BRAKE DISC CHECK
TIRE TREAD WEAR:
Utilizes laser technology to analyze tire wear without removing tires, providing accurate measurements within 0.1mm. Offers single and all tread check modes for different analysis levels.
Single Check: Measures the wear of each tire on the vehicle by examining the tread depth in the center area of the tire only, provides one measurement for each tire.
All Tread Check: Examines your tire wear in three separate areas (outer, center, and inner) for a more comprehensive analysis.
BRAKE DISC CHECK:
Examines brake disc wear quickly and accurately without tire removal, with graphical representation for easy understanding.
Quick Check option allows simultaneous analysis of both tire and brake disc wear.
2. LASER MEASUREMENT
Tire tread depth & brake disc wear check in one tool, without wheel removal.
Laser measurement with 0.1mm accuracy
Full tread measurement
Quick Check both tread depth & brake disc
3. Real-Time Tire Health Analysis
Provides detailed real-time measurement data on the touchscreen.
Graphical display of measurement data curve for analyzing uneven wear.
Test detail for single tire tread/brake disc.
Offers comprehensive replacement and maintenance suggestions, including tire and brake disc replacements, tire rotation, and alignment servicing.
Enables DOT scanning, tire expiration notice, and tire recall lookup for enhanced safety.
Allows taking photos of tire wear and damage for documentation.
Works with Autel TPMS Relearn Tool ITS600 to generate comprehensive test reports and professional tire maintenance tips for a wide range of tires.
Autel Maxi TPMS TBE200 vs. TBE100:
The Autel MaxiTPMS TBE200 features one-button operation for ease of use. Simply follow these steps:
Long press the power button to turn on the tool.
Perform Tire Tread Check by tapping the Tread Check icon on the Main Job screen and placing the tool on the tire surface. Short press the power button to get real-time measurement data.
Possible Results for Measurements: Interpret wear status using color-coded icons: gray (untested), green (good condition), yellow (replacement recommended), red (immediate replacement recommended).
Calibration: Tap the Calibration icon on the Main Job screen, place the magnetic head on the calibration table, and press the power button to start. Calibration is recommended every two months.
4x ARM Cortex-A35 (1.5 GHz)
1GB RAM LPDDR3 & 4GB ROM
1.65-inch AMOLED capacitive touchscreen with 348×442 resolution
• USB 2.0, Type C
CMOS WXGA, 1 megapixel & 8 megapixel, 30fps
Power and Battery
• 3.7 V/3000 mAh 18650 lithium-ion battery
• Charges via 5 V AC/DC power supply
Tested Battery Life
Around 8 hours of continuous use
Battery Charging Input
5 V/1.5 A
300 mA (AMOLED on with default brightness) @3.7 V
-10 to 45°C(14 to 113°F)
-20 to 60°C (-4 to 140°F)
1pc x Main unit
1pc x Calibration table
1pc x Power adapter
1pc x Type C USB cable
1pc x Quick reference Guide
1pc x Carrying Case