| |
M6 Product Functions |
M6+ Product Functions |
| Xentry Car |
√ |
√ |
| Xentry Truck |
√ |
√ |
| DTS Monaco |
√ |
√ |
| Vediamo |
√ |
√ |
| MB DOIP |
√ |
√ |
| MB WIFI |
√ |
√ |
| PC USB |
× |
√ |
| PC RJ45 |
√ |
× |
| BWM Aicoder |
× |
√ |
| BWM E-SYS |
× |
√ |
| BWM APP |
× |
√ |
| Other DOIP |
× |
√ |
Super MB Pro M6+ Car List
Passenger Car Supported List:
A(176), A(169), A(168), B(246), B(245), CLC(117), C(204) C(203), C(202), 190(201),
E(212), E(211), E(210), 124(124), S(222), S(221), S(220), S(140), S(126),
E(207), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140) SLK(172),
SLK(171), SLK(170), SL(231), SL(230), SL(129), SL(107), SLS(197),
M(166), M(164), M(163), G(463), G(461), E(212), E(211), E(210), 124(124), S(222),
S(221),S(220), S(140), CLK(209), CLK(208), CLS(218), CLS(219), CL(216),
CL(215), CL(140), SLK(172), SL(231), SL(230), SL(129), SL(107),SLS(197), M(166), M(164),
M(163), G(460), GL(164), GLK(204), R(251)
Van Supported List:
MB 100(631), T1, SprinterIII, SprinterII, SprinterI, Sprinter900, Citan, Vito(639), Vito(638),
V(638), Viano(639), T2, Vario, Vaneo(414)
Truck Supported List:
Actros963/4, Actros2,3, AtegoIII, AtegoII, AxorII, Eonic, Zetros, Actros,
Atego Light, Atego Heavey, HPN M96, Atron, HPN M2000, SKL, FSK,
Further model series
Unimog Supported List:
U20, UGN, UHN
Bus Supported List:
TRAVEGO, INTOURO, INTEGRO, CITARO, CAPACITY, CITO, TOURISMO,
O350/O403, CONECTO, O404, O405-O408,
Minibus, OC500, TOURO, TOURINO, MBC, MULITEGO, O500, O500/OH,
OH, OH368, OF, OF384, LO, O400, FURTHER MODEL SERIES
Super Sports Car Supported List:
SLR(199)
Super MB Pro M6+ Connection Instructions
(1)Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light
① on the host is always on, and the system indicator
② is flashing during startup. After startup,
② is always on and beeps once, indicating the startup is finished.
(2)Wired connection: Connect the USB port
⑦ of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and the IP address of the network connection property will be changed to 169.254.255.*, Subnet mask: 255.255.0.0, Preferred DNS: 169.254.255.255, click “Advanced”, add multiple IP addresses as 172.29.127.*, 255.255.0.0. After the computer or tablet is connected to the network,
④ the indicator light will be on.
(3) Wireless connection: You cannot find the wireless network by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet, just connect it. ⑤ The green light of the wireless indicator is always on, the wired light is off, no setting is required, the password is 123456789.
(4) After opening the BEN software lock on the computer side, the original diagnostic test software can be used normally.
(5) For remote C-end operation, please consult us.
2, Connection between BWM software and hardware
(1)Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, it is always on and beeps once, indicating the startup is finished.
(2)Wired connection: Connect the USB port of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and change the network connection attribute IP address to 172.29.127.* 255.255.255.0. Click “Advanced” and add a multi-IP address as 169.254.0.* 255.255.255.0. After the computer or tablet is connected to the network, the indicator light ④ will be always on. Press and hold the switch button ⑥ on the side for 3 seconds and then release it. You can see that the ④ green indicator light is always on and then flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.
(3)The wireless network can NOT be found by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet. You can connect without any settings, and the password is 123456789, ⑤The wireless indicator green light is always on, ④The wired indicator is off. Press and hold the ⑥ switch button on the side for 3 seconds and release it, you can see ⑤the wireless green indicator light is always on and turns to flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.
(4) The computer-side BWM software adopts wired or wireless connection, and the mobile phone BWM APP software adopts wireless connection.
(5) For remote C-end operation, please consult us.
3. For DOIP function and hardware connection of other diagnostic test software, please refer to BWM software and hardware connection method
Super mb pro m6 vs mb sd c3 vs mb star c4 plus vs OEM C6
| Name |
Super MB Pro M6+ |
MB Star C3 |
SD C4 Plus DoIP |
Benz OEM C6 |
| Features |
Functions same as C6 |
Main for old
Mercedes till 2015 |
Work with original
Xentry XDOS,
DoIP Enabled |
Support WiFi and DoIP |
Software
Compatibility |
Factory HDD/SSD,
Original software |
Factory HDD/SSD
Only |
Factory HDD/SSD,
Original software |
Factory HDD/SSD
Only |
| Update |
By HDD/SSD |
By HDD/SSD |
By HDD/SSD |
By HDD/SSD |
| Wifi |
Yes |
No |
Yes |
Yes |
| Diagnosis |
Yes |
Yes |
Yes |
Yes |
| Programming |
Yes |
Yes |
Yes |
Yes |
| Xentry |
Yes |
Yes |
Yes |
Yes |
| DAS |
Yes |
Yes |
Yes |
Yes |
| EPC |
Yes |
Yes |
Yes |
Yes |
| WIS |
Yes |
Yes |
Yes |
Yes |
| SDmedia |
Yes |
Yes |
Yes |
Yes |
| Star Finder |
Yes |
Yes |
Yes |
Yes |
| PL73 |
Yes |
Yes |
Yes |
Yes |
| DTS Monaco |
Yes |
No |
Yes |
Yes |
| Vediamo |
Yes |
No |
Yes |
No |
| DoIP |
Yes |
No |
Yes |
Yes |
| New Mercedes |
Yes |
No |
Yes |
Yes |
| Old Mercedes |
Yes |
Yes |
Yes |
No |
| Heat dissipation |
Heat sink+fan |
No |
Heat sink |
No |
Package Includes:
1pc x SUPER MB PRO M6+ Host
1pc x OBD2 16pin Cable
1pc x USB Cable
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 4PIN Cable
