EU Ship [Carton Box] TagFlash ECU Programmer for Car Truck Tractor Marine Motorbike via OBD / BENCH / BOOT / BDM / JTAG mode

 [EU Ship] TagFlash ECU Programmer Support OBD / BENCH / BOOT / BDM / JTAG mode Full reading TCU (MICROEEROM)

Notice:
When using TagFlash to read/write ECU via OBD, must plug Mini Gender Adapter. 
Mini Gender Adapter is the yellow Adapter which comes in package (shown as below). 
For OBD mode, use the Gender Adapter that cuts pins 3,8,9,11. This is essential for programming and reading via OBD. Using TagFlash in the car without the Gender Adapter, you risk to blow-up your adapter.
For BDM or JTAG mode, connect directly without the Gender Adapter.

Select "driver", then "Next", then it will pop up this message telling to connect gender adapter to the OBDII cable.


What is TagFlash?
TagFlash is a powerful ECU Programmer that enables the reading and programming of engine control units (ECUs) and transmission control units (TCUs) for various cars, trucks, motorcycles, Marine worldwide from Europe, USA, India, Asia, China etc.  It reads and writes EEPROM and flash memory of ECUs i.e Bosch, Marelli, Siemens, Ford, Delphi, Denso, Transtron, Delco, Continental,Motorola, Valeo, Siemens Continental etc. TagFlash read/write ECU in the mode of OBD, on Bench, Boot mode, BDM, and Jtag systems. Its versatility and broad compatibility make it a valuable tool for automotive technicians and enthusiasts.


TagFlash Highlights:

1.This new system developed with high-speed USB2.0 currently the fastest and safest production in the market.
2. It is easy to install and use by anyone. 
3.The Driver will always be clickable, the options will not become gray. 
4.Time synchronization is no need, it allows for some margin of error. 
5.On bench mode, directly identify the chip type before reading/writing .
6.Stable to read / write eeprom & flash via OBD.
7.Reliable for checksum calculations.
8.Add speed limit off. 
9.It is relatively up to date that the protocol is synchronized to the original tools.
10.It is not easy to damage the ecu. It can work directly if it can be written; if it cannot be written, it won't be possible from the beginning.
11.There is no need to restart the software when the software reports an error, and there is a direct reset function in the option.
12.Support working in offline mode.
13. Synchronize Agreements Until April 1st, 2023
14. Stability/Comprehensive: Yes
15. Own Servers in Multiple countries

TagFlash Compatible Vehicles:
Car 
Truck
Tractor/Marine 
Motorbike 
Read / Write ECU
Read /Write TCU (a part) 

TagFlash is confirmed to read/write ECU on many ECU types such as:

DCM2.7AP yes 
DCM2.7 yes
MD1CS018 possible: choose the chip type spc58 to read/write
sid208-sid209 read write on bench ok.
dcm7.1b can read via obd ok 
dcm6.2v read via obd no problem

TagFlash is not able to read/write: 
Sim2k260 NO
DCM7.1AP No 

TagFlash Compatible Operation System:

Windows XP 32 64 bit 
Windows Vista 32 64 bit 
Windows 7 32 64 bit 
Windows 8 
Windows10

Free Download TagFlash Software
Important Note
You MUST disable your anti-virus and firewall in order to download the software, driver and updates. Any active anti-virus will try to delete the files as it does not recognize the file as safe. They are safe but because of language issue it is often seen as a virus and it will delete your files. YOU MUST DISABLE YOUR ANTI-VIRUS AND FIREWALL or you will not be able to download the software properly.

TagFlash Language:
Ltaliano, English, Deutsch, Francais, Espanol, Polish, Portugues, Czech, Romana, Turkish, Hungarian, Russian, Bulgarian, Chinese, Japanese, Korean and Serbian

TagFlash Update: Free update
Annual Subscription: No need 

·5/30V Car, Industrial vehicles, WP
·Boot Mode C167,ST10
·RS232 RS485
·CAN BUS V2.0 50 Kb>10 Nkb
·J1850 VPW PWM GM-FORD
·BDM MPC5XX
·BOOT MODE TRICORE
·Auto setup Pull up K-ine 250,500,1000 ohm
·Auto setup termination Can bus 0,60,120ohm
·Master
·Recovery mode
·Checksum automatic

Available with options: Car, Truck, Tractor/Marine, Motorbike, Full Mode, Recondition (remove speed), Tool Boot, Bench Mode,BDM/JTAG. 

TOOLS BOOT MODE: 


Bench Mode: 



TagFlash Car ECU Reading/Writing Options:


TagFlash Truck ECU Reading/Writing List:


TagFlash Tractor /Marine ECU Reading/Writing List


TagFlash Motorbike ECU List:


Reading DCM2.7AP:



TagFlash Package List:

  

---

We are here for you:

Email: Sales@OBD2gate.com
Whatsapp: +86-18123844672
Skype: Sales@OBD2gate.com