Return for refund within 30 days, buyer pays return shipping.
No need for disassembly or cutting wires
Anti-theft data reading and writing, data calculation, and key programming in a single module.
Yanhua Mini ACDP Module 11 for BMW Gearbox EGS ISN Clearance. Reset ISN, adaptions, and backup coding easily. No disassembly needed. Secure and reliable data reading and writing.
Yanhua Mini ACDP Module 11 for BMW Gearbox EGS ISN Clearance
ACDP EGS ISN Module Function:
1. Support BMW 8HP(F/G chassis) gearbox refresh
2. Support 6HP(F chassis) gearbox refresh and cloning 3. Support BMW E Chassis 8HP ISN Clear now, if you need, you can pay for the A51D License for BMW E Chassis 8HP ISN Clear 4. Support BMW E Series 6HP ISN Clear now, if you need, you can buy A50F License for BMW E Series 6HP(GS19D) Gearbox/Transmission TCM EGS ISN Refresh
Top 4 reasons to get Yanhua Mini ACDP Module 11:
1: Free of disassembly, Solderless.
No need to remove components,
No need to cut the line, no risk of damage to the BCM computer board.
2: Set anti-theft data reading and writing, anti-theft data calculation, key programming in one.
3: The interface board replaces the welding wire, the pin connect with intelligent detection, and the data reading and writing is safe and reliable.
4: With the key refresh function, No longer afraid of loss caused by key be locked.
Support both 6HP& 8HP
If your ACDP was bought before April 2019, it will require a special adapter to work on 6HP.
Please pass us serial number for checking, adapter will be free for you, just need bear shipping cost yourself.
Functions includes as below:
1pc x BMW gearbox module interface board
How to Clear 8HP EGS ISN (F series) with Yanhua Mini ACDP?
Prepare ACDP, OBP+ICP adapter, EGS interface board and EGS module
Connect the EGS interface board 8HP end to the EGS module
Short the CAN termination resister on the OBP+ICP adapter to the "CAN-R-Join" terminal.
Connect the ACDP, OBP+ICP adapter, EGS interface board and EGS module.
Connect ACDP with vehicle via OBDII port
Connect ACDP to EGS interface according to the diagram
Go to BMW Programming function->Clear EGS ISN-> Clear ISN