Autel MaxiSys Ultra Intelligent Automotive Full Systems Diagnostic With MaxiFlash VCMI Get Free Maxisys MSOAK

Autel MaxiSys Ultra Intelligent Full Systems Diagnostics Tool with Autel MSOAK Accessory Kit

The Autel MaxiSys Ultra is an innovative and powerful diagnostics tablet designed to elevate technician intelligence. Equipped with a 13-inch touchscreen and powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad) running on Android 7.0 OS, the tablet boasts a substantial 256GB built-in memory. Its new split-screen multi-application navigation offers diagnostic guidance and facilitates component testing to ensure accurate repairs. With dynamic topology module mapping, enhanced AutoSCAN features, and Intelligent Diagnostics options, the MaxiSys Ultra provides step-by-step repair guidance for technicians.

Highlights:

Notice:

1. Not compatible with Benz gateway.
2. Default Language: English.

Autel MSOAK Oscilloscope Accessory Kit

Features and Benefits:
The MSOAK is compatible with MaxiFlash VCMI included with the MSUltra and MS919, as well as the MP408 4-channel oscilloscope (sold separately). It includes the following components within a blow-molded carrying case:

The Coil On Plug Probe:

This probe allows easy capturing of the ignition waveform of automobile engines. It provides a window to observe the engine combustion chambers, enabling the assessment of various engine conditions, such as ignition plug status, fuel injector performance, air cylinder leakproofness, oil pollution, carbon deposition, and battery health.

65A AC/DC CURRENT CLAMP & 650A AC/DC CURRENT CLAMP

When measuring AC or DC with the current clamp, you can connect it with a multimeter or an oscilloscope to directly read the current value without physical contact with the conductor. The current clamp measures a maximum current of 65A with a frequency up to 20 KHz. It works with jaws that open to allow clamping around an electrical conductor. And the 650A AC/DC current clamp measures a maximum current of 650A with a frequency up to 400 KHz.



Top-level Configurations, OE-level Topology Module Tree

The new Topology Module Listing CAN BUS Tree, specifically designed for the OEM diagnostic tools, displays all available control units of the test vehicle in different colors. This feature allows users to understand the number of systems, scanned systems, and scan results at a glance.

Intelligent Diagnostics, One-Stop Solution for DTCs

Intelligent Diagnostics provides smart shortcuts related to the fault code, helping technicians repair detected faults efficiently.

One-Stop Solution to Guide Customers to Solve the Faults Step by Step

Advanced J2534 ECU Programming & Coding

The need to perform programming & coding services is now more relevant in the aftermarket than ever. There are more and more instances where programming/coding is necessary, e.g., replacing a module, replacing the existing software or firmware in the ECUs, fixing software-controlled drivability issues and emission issues, etc. There are two general types of programming operations:

A. Coding--also known as Teach-in Program, or Component Adaptation, is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts.

B. Programming --downloads the latest version of software from the online server database through Internet access (this procedure is done automatically when the tablet is connected to the Internet, so there is no need to check for software updates yourself), and reprograms the newest version into the vehicle's ECU.

Autel top scanner MaxiSys Ultra with VCMI can help you solve all above issues. With D-PDU, SAE J2534 & RP1210 protocols, Auto scan tool Maxisys Ultra provides diagnosing, coding, and programming for more passenger and commercial vehicles, much more advanced than J2534 programming tools.

36+ Maintenance Functions Greatly Improve Work Efficiency:

26 Commonly Used Reset Functions for Fast Maintenance or Repairs: Oil Reset, EPB, BMS, ABS Bleed, TPMS, Airbag Reset, DPF Reg., IMMO Service, Injector Coding, SAS Calibration, Suspension Calibration, Throttle Adaption, ABS/SRS, Gear Learning, Sunroof Initialization, Seats Calibration, Language Change, Headlight Matching, A/F Setting, WIN DR Roof, Odometer, CHG Tire Size, Cylinder, Turbocharging, Limit, Trans Adaption.

10+ Advanced Functions for Different Vehicle Models:
Neutral Gear Position Learning, Torque Sensor Adjustment, Signal Check, Yaw Rate Sensor (YRS) Learn, Clutch Pedal Position Learn, Cylinder Power Balance, Component Matching, Stop/Start Reset, Transport Mode, Auto-Door Lock, etc.

• Oil Reset, to reset the oil service lamp for the engine oil life system; EPB Reset, to reset the brake pad after replacing the brake pad.
• ABS Bleeding, to perform various bi-directional tests of Anti-lock Braking System;
• Injector Coding, to write the new code to the ECU after replacement of injector.
• Suspension Calibration, to adjust the height of the body; SAS Calibration, to calibrate the steering angle after replacement.
• Anti-theft Matching, to disable the lost key and add the new key’s data for security.
• BMS Reset, to perform a resetting operation on the monitoring unit of the vehicle battery.
• Tire Pressure Reset, to look up the tire sensor IDs, reset tire pressure, and turn off the tire pressure MIL.
• DPF Reset, to retrieve/erase DPF-related codes, and reset the DPF light.
• Throttle Matching, to make initial settings to throttle actuators.
• Gearbox Matching, to achieve a more comfortable and ideal shift quality.
• WIN DR ROOF, Seats, Odometer, Lang Change, Headlamp, CHG Tire Size, TEC Learn, Cylinder, Trans Adaption, Airbag Reset, etc., and are still growing.

Autel Ultra Specification:
 

Operating System	Android 7.0
Processor	Samsung Exynos8895V octa-core Processor (2.3GHz Quad-core Mongoose + 1.7GHz Quad-core A53)
Memory	4GB RAM & 256GB On-board Memory
Display	12.9 inch TFT-LCD with 2732 x 2048 resolution & capacitive touch screen
Connectivity	* WiFix2 (802.11 a/b / g/n/ac 2x2 MIMO) * BT v.2.1 + EDR * GPS * USB 2.0 (Two USB HOST Type A, one USB mini device) * HDMI 2.0 * SD Card (Support up to 256GB)
Camera	* Rear: 16 Megapixel, Autofocus with Flashlight * Front: 5 Megapixel
Sensors	Gravity Accelerometer, Ambient Light Sensor (ALS)
Audio Input / Output	* Microphone * Dual Speakers * 3-Band 3.5 mm stereo / standard headset jack
Power and Battery	* 18000mAh 3.8 V lithium-polymer battery * Charging via 12 V AC / DC power supply with the temperature between 0° C and 45° C
Input Voltage	12V / 3A Adapter
Operating Temp.	0 to 50° C (32 to 122° F)
Storage Temperature	-20 to 60° C (-4 to 140° F)
Protocols	DoIP, PLC J2497, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 Single Wire Can (GMLAN), ISO-11898-2, ISO-11898-3, SAE-J2819 (TP20), TP16, ISO-9141, ISO-14230, SAE-J2610 (Chrysler SCI), UART Echo Byte, SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART with Clock, BMW DS2, BMW DS1, SAE J2819 (VAG KW81), KW82, SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2)