2023 V1.1.2.0 Full Version CG FC200 ECU Programmer with Solder Free Adapters

CG FC200 ECU Programmer Full Version with New Adapters Set 6HP & 8HP / MSV90 / N55 / N20 / B48/ B58/ No Need Disassembly

Highlights:

1. Protect Original Car Parts

More than 98% of ECUs support BENCH mode and OBD mode, no need to open the cover and punch holes to protect the original car.

2. Intelligent Recognition

The "Identification" function can help users better diagnose whether the ECU module is communicating and check whether the wiring is wrong. If the ECU module can communicate without damage and the wiring is correct, the recognition can be successful, and the chip information, hardware information and firmware information can be read out.

3.Module Clone

Supports ECU data reading/writing and module cloning, no synchronization matching, no online programming, data sub-regional burning, automatic verification, and maximum protection of chips and modules.

4. ISN Read and Write

Supports engine computer ISN code acquisition for all BMW series (including Mini), which is convenient for key matching and anti-theft maintenance.

5.VIN modification

Solve the problem of double VIN or VIN mismatch of vehicles, which is convenient for vehicle maintenance.

6. Data Processing

Support engine computer data analysis and modification for Audi / Seat / Skoda / Volkswagen models;
Support the shutdown of Bosch MED / EDC17 series engine computer anti-theft system;
Support the TPROT off function of Bosch VAG MEDC17 series, BMW / Mini MEVD17 / EDC17 series, Hyundai / Kia EDC17 / MED(G)17 series.

7. FC200 not only support BMW ECU but also support over three thousands of ECUs like KTAG, Kess, Dimsport etc.
Please check FC200 Support ECU List

8. Multi-Language: English, French and Simplified Chinese

Spanish, Polish, Turkish and Traditional Chinese need to pay $130.

9. Full Version with All Licenses Activated.

After 1 Year Free Update, It will cost $199 per year for FC200 Update Service

10. With New Adapters Set No Need Disassembly in Package:

Adapters Including: 6HP & 8HP, MSV90, N55, N20, B48 / B58, B38, 271KE Adaper, 271DE Adapter.
(With this adapter set, you won't need the old B48 / B58 cable anymore).

Notice:
FC200 Software Free Download Link, please download here when you get the package.

V1.1.2.0 Software：

1. Fix the problem of engine recognition and read/write failure in GM E38, E67 and E39
2. Add GM E37, E39A, E78, E80 and E83 engine platform mode
3. GM E38, E67, E39 and E39A engines add Ext FLASH verification function
4. Add the "time repair" function of "Lovol harvester" to support the EDC17CV53 engine of Lovol harvester
5. Benz VGS-FDCT, VGS2-FDCT and VGS-FCVT gearbox add PFLASH verification function
6. Volkswagen DL501 Gen2 and DL382 transmissions add PFLASH verification function
7. Add BOSCH ST10 engine: M7.4.4, ME7.3.2, ME7.4.4
8. Fix the connection failure of DELPHI CRD3.10, CRD3.xx TC1797 and other engine platform modes

V1.1.0.0 Software
(2022.12.13)

1. Added DELPHI platform and BOOT engine: CRD3.10, CRD3.E1, CRD3.F1, CRD3E.1, CRD3P.B0, CRD3P.C0, CRD3P.D1, CRD3P.G0, and CRD3xx

2. Added BOSCH BOOT engines: ME7.5.20, M7.9.5, ME7.9.51, and ME7.9.52

3. Add PFLASH check function for MG1C, MD1C SPC5777 and TC298TP engines of BOSCH

4. Added password reading function in the platform mode of GM engine E39

5. Optimize the PFLASH verification algorithm of BOECH's TC17 series engines

6. Added BOSCH platform engine: EDC17CV53

7.Fix some bugs and optimize software performance

Functions of Each Adapter:

1. MSV90 Adapter:
This adapter supports ISN reading/writing, data backup and recovery of BMW MSV90


2. N20 Adapter:

This adapter supports ISN reading and writing, VIN modification and data reading/writing functions of the N20 and N13 of the F series chassis of BMW



3. B48 / B58 Adapter:

This adapter supports ISN reading, data reading/writing functions of BMW models: MG1CS003, MG1CS024 and MG1CS201.



4. 271KE Adapter & 271DE Adapter:

These two adapters support the data backup and recovery functions of Mercedes-Benz SIM 271KE and SIM 271DE




5. 6HP & 8HP Adapter:

The adapter is used for the data backup and recovery function of the 6HP and 8HP EGS of BMW models.



Package List:

1 set x CGDI FC200 Full Verion
1x New Adapters Set No Need Disassembly including 6HP & 8HP / MSV90 / N55 / N20 / B48/ B58/ B38

---

We are here for you:

Email: Sales@OBD2gate.com
Whatsapp: +86 18123844672
Skype: Sales@OBD2gate.com

How to Change CG FC200 Language and Activate Language License?

CG FC200 currently supports multi-language incl. Simplified Chinese, English, French (Traditional Chinese, Spanish, Polish and Turkish require language authorization).

Here shares the guide to change language and activate language license for using.

Steps to change FC200 language:

1. Run FC200 software

2. Click ‘Setting’ at the top right corner of the software interface

3. In the language field, click the drop-down arrow to select the corresponding language

4. Then click ‘Apply’

Tips to activate CG FC200 language license:

If you need Traditional Chinese, Spanish, Polish or Turkish, you should buy language license and activate it to use. Otherwise, FC200 software will prompt ‘The device is not licensed for this language, please contact the developer.’

Kindly notice:

CGDI Language License also applies to CG 9S12 Pro, CGDI Prog BMW, CGDI Prog MB and AT200.

All CG devices are multi-language enabled. But for some languages require activating the language license to use.

CG Pro: Chinese English (French, Spanish and Turkish require language authorization)

CGDI BMW: Chinese, English, Spanish, French (Polish, Turkish, and Italian require language authorization)

CGDI MB: Chinese, English, Spanish, French, German (Russian, Polish and Turkish require language authorization)

AT200: Simplified Chinese, Traditional Chinese, English, French, Spanish (Polish requires language authorization)
 

How to get CGDI language license?

Contact our customer service to get the language license, no need shipping, just provide S/N to us after payme