Package Dimensions | 26 x 18 x 6 cm; 1.2 Kilograms |
Item Weight | 1.2 kg |
Returns | Return for refund within 30 days,buyer pays return shipping. Read details » |
CG FC200 ECU Programmer Full Version
FC200 Highlights:
1. Protect Original Car Parts
More than 98% of ECUs support BENCH mode and OBD mode, no need to open the cover and punch holes to protect the original car.
2. Intelligent Recognition
The "identification" function can help users better diagnose whether the ECU module is communicating and check whether the wiring is wrong. If the ECU module can communicate without damage and the wiring is correct, the recognition can be successful, and the chip information, hardware information and firmware information can be read out.
3.Module Clone
Supports ECU data reading and writing and module cloning, no synchronization matching, no online programming, data sub-regional burning, automatic verification, and maximum protection of chips and modules.
4. ISN Read and Write
Supports engine computer ISN code acquisition for all BMW series (including Mini), which is convenient for key matching and anti-theft maintenance.
Check FC200 BMW ISN Read and Write List
5.VIN modification
Solve the problem of double VIN or VIN mismatch of vehicles, which is convenient for vehicle maintenance.
6. Data Processing
Support engine computer data analysis and modification for Audi/Seat/Skoda/Volkswagen models;
Support the shutdown of Bosch MED/EDC17 series engine computer anti-theft system;
Support the TPROT off function of Bosch VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.
7. FC200 not only support BMW ECU but also support over three thousands of ECUs like KTAG, Kess, Dimsport etc.
Check FC200 Support ECU List
8. For Checksum Function, Please Check FC200 Support Checksum List for Reference.
9. There are 3 Operating Modes: CAN-BUS, Bench Mode and Boot Mode
10. Multi-Language: English, French and Simplified Chinese
For Spanish, Polish Turkish and Traditional Chinese, will need to pay $130 to get authorized seperately with serial number.
11. Full Version with All License Activated.
Free Update Online for One Year. Annual Fee will be $200/year after the first year.
FC200 Software Features:
1. Interactive interface
The level is clear, the function is clear, and the "brand-model-ECU" structure is used to help users save time and accurately find the operating directory.
2.Built-in Model Search
Support ECU model and Bosch number search, avoid the trouble of level selection, and enter the function interface as quickly as possible.
ECU Search: Take the BMW MSV90 engine computer as an example. First select "BMW", select "ECU" as the search condition, enter "MSV90", click the search button, and the ECU type will appear.
Bosch Number Search: Take the Volkswagen engine computer as an example. First select "Volkswagen", select "Bosch Number" as the search condition, and enter "0261S10525".
Please note that the Bosch number is a ten-digit number and the letters are capitalized. Click the search button, and the ECU type will appear.
3. Intuitive Wiring Diagram
Highly paid professional designers are hired to produce, 1:1 simulation, bright colors, to avoid user wiring errors.
FC200 Model Support:
Support 4200 kinds of ECUs, involving 80% of the models on the market.
European Cars: Abbas, Alfa Romeo, Aebi, Artec, Aston, Aston Martin, Audi, Bentley, BMW, Bugatti, Citroen, Dacia, CASE, CASE Tractors, Dallara, Deutz, DS, Ducati, Fendt, Ferrari, Fiat, Jaguar, KTM, Lada, Lamborghini, Lancia, Land Rover, MAN, Maserati, McLaren, Mercedes-Benz, MG, Mini, Opel, Peugeot, Piaggio, Porsche, Renault, Royal Enfield, Saab, SEAT, Skoda, Smart, Steyr, UAZ, Vauxhall, Volkswagen (VW), Volvo, Volvo Penta.
American Cars: Can-Am, Caterpillar, Chevrolet, Chrysler, Dodge, Ford, Ford Trucks, Freightliner, GMC, Indian, Internation, Jeep, Lincoln, New Holland, Polaris, Hidu.
Asian Cars: Force, Genesis Motors, Honda, Hyundai, Infiniti, Isuzu, Kassan, Kia, Kubota, Mahindra, Mitsubishi Fuso, Nissan, Subaru, Suzuki, Toyota.
Chinese Cars: Changan, Chery, Foday, Geely, Great Wall, Iveco, Jianghuai, Jiangling, Lifan, Ferguson, Valtra
CG FC200 Latest Update Information:
CG FC200 V1.1.1.0 Software Update Notice on Feb 1st, 2023
1. Setup interface adds-Server Selection function
2. Optimize the device activation interface (add the "Activate" prompt)
3. Repair the failure problem of the Bosch query abroad
4. Added GM AcDelco transmission platform mode: GM 6T30/35/40/45/50, GM 6T70/75/80, GM 6L45/50/80/90
5. New BOOT mode of BOSCH ST10 engine: ME7.1.1, ME7.5.10, ME7.8.2, and MED 7.6.2
6. New BOSCH TC17 engine platform mode: ME17 TC1728 (China)
7. New BOOT mode of KEFICO TC17 engine: CPGDSH2.2x.x, CPGDSH1.26.1, KME 1.9.3.1
8. New BOSCH VAG gearbox PFLASH calibration function: DQ200 TC1784, DQ200 TC1766, DQ250 TC1766, DL501Gen1 TC1766, VL381 TC1766
9. Newly modified VIN model: MED 17.8.3
CG FC-200 V1.1.0.0 Software Update Notice on Dec 13th, 2022:
1. Added DELPHI platform and BOOT engine: CRD3.10, CRD3.E1, CRD3.F1, CRD3E.1, CRD3P.B0, CRD3P.C0, CRD3P.D1, CRD3P.G0, and CRD3xx
2. Added BOSCH BOOT engines: ME7.5.20, M7.9.5, ME7.9.51, and ME7.9.52
3. Add PFLASH check function for MG1C, MD1C SPC5777 and TC298TP engines of BOSCH
4. Added password reading function in the platform mode of GM engine E39
5. Optimize the PFLASH verification algorithm of BOECH's TC17 series engines
6. Added BOSCH platform engine: EDC17CV53
7. Fix some bugs and optimize software performance
Newest CG FC200 V1.0.9.0 Upgrade Notice in Oct, 2022:
1.Added GM engine computer
ACDelco E38: Read and write EEPROM and FLASH
ACDelco E39: Read and write FLASH and password
ACDelco E67: Read and write EEPROM and FLASH
Models involved: Buick, Cadillac, Chevrolet, GMC, Holden, Hummer, Isuzu, Opel, Pontiac, Saab, Saturn, Vauxhall
2. Added new gearbox computer
ZF_9HP TC1782: Read and write DFLASH and PFLASH
Models involved: Acura, Chrysler, Citroen, DS, Peugeot, Dodge, Fiat, Honda, Jaguar, Jeep, Land Rover
3. Added Bosch engine computer (platform mode)
MD1CS018
MG1CS032
MG1CS026
MG1CA007
MG1CA811
MG1CA920
4.Added engine computer to modify VIN function
EDC17C42
EDC17CP27
MED17.8.2
MEVD17.2.7
5. Fixed some bugs and optimized software performance
Note:
Please update the authorization for the first time to use, and then restart the FC200 software.
CG FC200 V1.0.8.0 Registered Version NEW (2022.09.07)
1. Added BMW 28A0, 101F fault code closing function
2. Added Bosch series engines: EDC17CP05 TC1797, EDC17C61, MED17.6.9, MG1CS019, MD1CS012, EDC17CV45, MG1CP002, ME17.U.6, MEV17.4.2 TC1766, MEV17.4.2 TC1767
3. New Bosch platform mode engines: ME17.8.8, MED17 and MED17.8.10
4. New Bosch boot mode engines: ME7.7.0, M7.9.8, MEG17.9.2, MEG17.9.21
5. Fix some bugs and optimize software performance
6. Add service renewal function
FC200 V1.0.7.0 (2022.06.28)
1.Added Bosch ST10 series engine boot modes: M7.9.7, ME7.9.71, ME7.9.7, ME7.4.5, ME7.9.9, MED7.6.1, MSE3
2.Added Hyundai and Kia KEFICO series engine boot modes: CPEGD2.20.1, CPEGD2.20.2, CPEGD2.20.3, CPEGD2.20.4
3.Added Delphi engine boot mode: CRD2.x MPC5566
4.New Bosch boot mode engines: ME17.9.23, MED17.7.5, ME17.9.7, M17.8.7, MED17.8.2, EDC17CP65, ME17.8.5
5.Newly added engines to modify the VIN function: EDC17C63, EDC17CV44, MED17.1.1, MED17.8.2, MEDG17.0
6.Modify the VIN function and add the function of forcing a new VIN to be written
7.Fix some bugs and optimize software performance
FC200 V1.0.6.0 (2022.04.26)
1.Add Bosch Engine Model:
EDC17C192.Add Engine Computer Edit Vin Function:
EDC17C63
EDC17C76
EDC17C79
EDC17CP52
MEG17.9.12
MED17.8.10
MED17.8.32
MED17 (China)
MED17.9.8
ME17.8.8
ME17.9.23
ME17.9.64
MEG17.9.8
FC200 V1.0.5.0 (2022.02.28)
1. Add Turkish language version
2. Added BOOT mode of bosch engine computer
ME17.5.26
ME17.8.32
ME17.9.1
ME17.8.61
MED17.8.31
MED17.9.8
MED17C17.9
MED17C81
3. Added Bosch engine computer Bench Mode
ME17.7.8
ME17.9.1
MED17.8.2
MED17.9.8
EDC17C45
4. Bug fixed and Software performance improved
FC200 ECU Programmer Wiring Diagram:
For Volkswagen ME17.5.22-TC1724:
For BMW N20 MEVD17.2.9-TC1797:
FC200 ECU Programmer Hardware:
FC200 Main Unit
1. Integrated injection of polymer materials, professional customized internal circuit boards, national patent certification
2. Exquisite design, easy to carry, can shield surrounding interference signals, adapt to various operating environments
3. There are 3 expansion ports for peripherals, which are automatically diagnosed and identified. They are 12V power port, USB port and DB15 port.The DB15 port can be connected to a free-dismantling adapter and OBD cable.
FC200 Adapters
1.Vehicle-grade wiring harness, made of synthetic metal, has excellent internal conductivity, and can be used continously for 10,0000 times.
2. Tight design, seemless connection between ECU and host to ensure continuours communication and excort your operation
3. Equipped with B-type, C-type, D-type, F-type and G-Type pin interfaces, suitable for many types of ECU and EGS
OBD2 Cable
FC200 obd2 cable mainly suitable for BMW B48/B58 ECU at present, read ISN via OBD without disassembly.
110cm, made of synthetic material, resistant to high temperature water-proof, anti-corrosion is designed according to OBD port of the vehicles, built-in anti-falling buckle make connection stable
CG FC-200 Package:
1pc x CGDI FC200 Host
1pc x OBD Cable
1pc x Jumper
1pc x USB Cable
6pcs x G-type Adapter Cable
3pcs x F-type Adapter Cable
6pcs x E-type Adapter Cable
6pcs x D-type Adapter Cable
6pcs x C-type Adapter Cable
6pcs x B-type Adapter Cable
FC200 ECU Programmer Powerful Functions:
1. Original parts Protection FC200 supports OBD and platform mode for more than 98% ecu and egs, no need to open shell, no punch, protect original parts of the vehicle.
2. Smart Identification The “identification” function can help users diagnose whether the ECU module is communicating and check whether the wiring is wrong. If ECU module is not damaged and can be communicated, wiring is correct and identification is successful, can read chip and firmware information. 3. Module Clone Supports ECU/EGS reading& writing and modules clone, synchronization matching free, no need online programming. Flash data by area, automatically check, protect chips and modules furthest 4. ISN Reading and Writing Supports all BMW series (including Mini) ECU ISN code acquisition, convenient for all keys lost matching and anti-theft fault maintenance.
5. VIN Writing Solve the problem of double VIN or VIN mismatch of vehicles, convenient for vehicle maintenance.
6. Data Processing Support data analysis and modification for the 4th and 5th generations of Audi/Seat/Skoda/Volkswagen ECUs Turn off anti-theft system for Bosch MED/EDC17 series ECU TPROT off function of Bosch VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.