HTprog Full Version (adapter +cables + dongle) Work Alone, used as an ECU Chip tuning Tool, an on Bench Programmer, an EEPROM Programmer, also perform Key function, it works alone without connecting to KT200 ECU Programmer.
HTprog Full Version (adapter + cables+ dongle) Works Alone as ECU Chip tuning Tool / on Bench Programmer/ EEPROM Programmer / Key function
HTprog support list:
1. HTprog ECU Clone Function List
2. HTprog on Bench Programmer Function List
Highlights:
1. ECUHELP HTprog includes MPC Module, EEPROM module, BDM adapter, Tricore adapter, Dongle
2. Works online with an internet connection every time
3. No need to connect with
ECUHELP KT200
Notice:
1. It is advised to uninstall any antivirus software and disable the firewall before using the ECUHELP HTprog.
2. It is important not to upgrade the software to avoid any potential damage to the hardware.
Can't support update.
3. Activation of the HTprog is necessary and should be done using the user's registered email address.
4. Install software version: 1.0.45
HTprog Functions:
Chip Tuning / ECU Cloning
With HTprog you can read and write P-Flash,D-Flash, External Flash and external EEPROM with the option of automatically checksum correction, you will have many methods in most of ECUS:
1. Factory mode (On Bench for most of ECU/TCU): with this option you don't have to open the ECU cover. Just plug some wires for power and signals and you are ready to go.
2. Tricore Boot Mode for all Tricore ECU: Opening the ECU is mandatory to connect the boot wire on the ECU board. This method is useful when the ECU is not responding
3. BDM (Background debug mode)
4. JTAG for Renesas and Freescale
BDM Read / Write
With HTprog you are able to break the protection of immobilizers like CAS in BMW. EIZ / EIS in Mercedes Benz. BCM in Volkswagen and Porsche.etc.
Built in Editors
With HTprog you can edit many Flash data like:
Edit CAS3+ VIN, ISN and keys
Edit CAS4,CAS4+ VIN,and ISN
Edit mileage for BMW instrument clusters
Other functions
You can do key reset for many brands like Audi, BMW,MIN, Porsche, Toyota,Fiat, Renault...etc.
Read/Write a wide range of SOP8 EEPROMS.
Works side by side with Autohex to make keys.
Key Features
Master version. One License for all protocols on bench.
Supports one of the largest ECU/TCU list in Cars and Trucks for ECU cloning and Chip Tuning. Supports both old and latest ECU / TCUs from Bosch,Continental, Delphi, Marelli,Denso, Tenic,TRW and Valeo.etc.
Reads all BMW long ISN from BMW DME and DDE including MD1 and MG in F/G series
IMMO BDM Read/Write
With HTprog you are able to break the protection of immobilizers like CAS in BMW, EIZ / EIS in Mercedes Benz.BCM in Volkswagen and Porsche...etc.
Look at the following images showing that HTprog can be used as Chip tuing / ECU cloing tool, on bench programmer, EEPROM programmer, key functions etc.
HTprog Package List:
1pc x HT-PROG adapter
1pc x MPC Module
1pc x EEPROM module
1pc x +12V Power Supply
1pc x BDM adapter
1pc x Tricore adapter
1pc x USB
1pc x Software Dongle
We are here for you:Email: Sales@OBD2gate.comWhatsapp: +86-18123844672Skype: Sales@OBD2gate.com
