KT200 ECU Programmer is a complete tool for reading and programming ECU (engine control units) and TCU via OBD/Bench/Boot mode, the BDM/Jtag systems are also available.
How To Install KT200 New Software ?
Step 1: Download the kt200 service and installation package, Unpack the packages and complete the installation.
Step 2: Connect the device, open the "Device manager" in your computer and manually install the device driver. After completion, open the kt200 service
Step 3. Click " download software" in kt200 service to install the KT200 work software, it will automatically update the newest version, and wait for the installation.
Step 4. Click the "Wiring diagram "to download (this has all the wiring picture the device supported), and it will automatically download and complete the installation.
Step 5. After completing software download, You can open the software normally. And after downloading the Wiring diagram, you can do the ecu work normally.
Step 6. When the software cannot be opened, you can click the "Diagnosis" button in KT200 service software first for detection.
KT200 New Software Free Download:
Free Download KT200 12.10 Software with DRIVER
KT200 2022.12.10 new update:
NEW AUTOMATIC FUNCTION: TRICORE CLONE
Added automatism to clone the following control units with OTP zone adaptation and password:
– BRP Can-Am ME17.8.5
– BMW MED17.2
– BMW MEV17.2
– MINI MED17.2
– MINI MEV17.2
– MERCEDES BENZ EDC17 CP01
– OPEL EDC17 C84
– OPEL EDC17 C42
KT200 Support ECU/TCU List:
KT200 ECU Programmer Support ECU List
KT200 ECU Programmer Support TCU List
Master: Read and write ECU data, read it in BIN unencrypted format, you can modify the data arbitrarily, you can clone ECU and use it as ECU service, the master is a personal version, you can only use it yourself, cannot unlock data for the slave.
Free Download KT200 wiring diagram
Get free VR file in this software ECUHelp V3.0
Download
patch if some protocols not found after update, then follow Update video guide
Operating system:
Windows 7
Windows 8/8.1
Windows 10
Windows 11
Notice:
1. Please close the anti-virus program before you run the KT200 software, it may incorrectly identify the software as harmful and break it.
2. Please connect to the Internet to work with KT200 software, otherwise, it will not work.
3. We provide the following items: DTC code Removal EGR & DPF Removal, IMMO OFF, releasing speed limit, mileage correction, Hot start or Cold Start Vmax, and so on.
KT200 ECU Programmer Multiple Connections
KT200 ECU Programmer Features:
1. KT200 ECU Programmer covering up to 5400 ECU, and over 500 TCU.
2. Support Audi/VW ECU Clone via Bench Mode pinout.
3. Bosch EDC17, MED17/ME17, and SIEMENS Pcr2.1(with Pinout also unlocking possibility) read and write in Bench Mode.
4. KT200 ECU Programmer Vehicle list is constantly updated and stays ahead of the industry.
7. The KT200 ECU programmer software allows you to forcibly write (forcible clone) without checksumming and supports forcibly reading and writing unknown ECUs with supported chip models.
8. Covering a full range of German, ECU Programmer, Japanese, American, and Chinese models.
9. Software Update: Update online free lifetime. No subscription, No annual Fee.
Function:
Covering a full range of German, ECU Programmer Japanese, American and Chinese models
EGR & DPF Removal, IMMO OFF, releasing speed limit , mileage correction, Hot start or Cold Start Vmax, and so on.
The list of vehicles is constantly updated, which keeps you at the forefront of the industry.
Support Volkswagen Audi clone (local operation without sending data to manufacturers)
ECU maintenance, Chip tuning, DTC code Removal, professional reading and writing equipment covering 99% of the models in the market.

KT200 Full Version Software includes 10 licenses:
Car OBD, Truck OBD, Tractor OBD, Boat OBD, Motorbike OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gearbox
Chip tuning is to improve engine performance by modifying the data read out by the equipment. The data is divided into: Stage 1 data, Stage 2 data, and Stage 3 data.
ECU maintenance data is to repair software errors in the ECU and some identity data of the ECU by modifying the data read by the device. We provide the following items:DTC code Removal
KT200 has 2 versions:
1. Car version (Auto version): Car OBD, Truck OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear
2.Full configuration version: Car OBD, Truck OBD, Tractor OBD, Boat OBD, Motorbike OBD, Full System, BDM/JTAG , TOOL BOOT, Bench Mode, TCU Gear,
You can update Auto Version to be full version, provide S/N and order update service:
|
Auto Version |
Full Version |
Car OBD |
√ |
√ |
Truck OBD |
√ |
√ |
Tractor OBD |
× |
√ |
Boat OBD |
× |
√ |
Motorbike OBD |
× |
√ |
Full System |
√ |
√ |
BDM/JTAG |
√ |
√ |
TOOL BOOT |
√ |
√ |
Bench Mode |
√ |
√ |
TCU Gear |
√ |
√ |
Professional software for reading and programming the control units of: