Yanhua Mini ACDP 2 Programming Master support BMW CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+/FEM/BDC Key Programming by OBD port, no need soldering.
2023 Yanhua Mini ACDP 2 Programming Master Basic Host
ACDP 1: Wireless connection only
ACDP 2: 1: USB direct connection, plug and play; 2: WiFi connection; 3. Data transfer upgrade: Data storage and transmission, faster, more stable and safer
Highlights:
1. No need to remove chip
2. No need soldering
3. No need to cut the line
4. No need to lift the pin
5. Solder-free programming & Data safety
6. WiFi connection & USB connection
Yanhua Mini ACDP2 host itself supports CPU read and write function only.
You can pay for different modules, e.g FEM/BDC module, CAS module, read DME ISN module and a couple of other modules.
Notice:
1. Module 3, 8, 12, 15, 18, 19, 25 and 30 uses different interface board as ACDP 1st generation.
2. Need to purchase above module separately if using ACDP 2.
3. ACDP2 uses different PC software, don't use PC software for ACDP 1st Generation.
Yanhua Mini ACDP Function:
EEPROM Programming:
Support 93/24/25/35/95 Series EEPROM in circuit programming (ICP) and on adapter board programming(OBP).
BMW module Programming:
1. Support CAS1-CAS3+ IMMO key programming and mileage reset through OBD mode.
2. Support CAS3+/3++, CAS4/4+key programming and mileage reset by ICP.
Data reading and writing without lifting the pin. No removing any components. Intelligent detection.
3. Support FEM/BDC IMMO key programming and mileage reset.Fully automatic mode matching.Safe,reliable and fast!Support FEM/BDC module restore, FEM/BDC backup and write anti-theft data at the same time.
4. Support key unlocking, key refresh function.
5. Repair (FRM) Footwell module data without coding.
6. Support BMW 8HP (F/G chassis) gearbox refresh. 6HP (F chassis) gearbox refresh and cloning.
7. Support CAS1-CAS4 data restore. It can modify vehicle frequency, VIN, ISN code, or replace CAS module by modifying EE data.
8. Support OBD restore CAS3/CAS3+/CAS3+ problem caused by downgrade
9. Read ISN codes of N20/N55/N13 by OBD or without openning the DME shell. Read ISN code of MSV70/MSV80/MSD80 without opening the DME shell. Read ISN code of other models (B38, etc.) by opening the shell.
10. Support instrument calibration of BMW full range.
Jaguar/Land Rover KVM module Programming:
Support Adding key and all-key-lost for new Jaguar and land rover with KVM module after year 2015.
Porsche BCM module Programming:
Support Adding key and all-key-lost for new Porsche after year 2010
Volkswagen MQB module Programming:
Support parts of VDO key programming/mileage adjustment of VW MQB platform via OBD, and Passat MMC(NEC D70F3525+95320) instrument adjustment after years 2015 by ICP mode.
Fujitsu CPU module Programming:
Support Fujitsu CPU MB91F (Honda Fit,KIA K3/K5,Sonata 9,etc.) Mileage adjustment.
Clear EGS ISN
Scope of application:
For connecting BMW 6HP/8HP gearbox
Functions includes as below:
EGS State
Clear ISN
Reset Adaptation
Backup Coding
Recover Coding
Volvo ECM Key Programming
Adding Key & All Keys Lost from 2009-2018
VW/Audi Gearbox Clone Module
Support VW, Audi DQ200 (0AM/0CM), DQ250(02E/0D9), DL382(0CK), DL501(0B5), VL381(0AW) models, etc
How to Bind the ACDP second-generation:
1: Bind directly through the USB cable. The 3 USB cables correspond to Android, IOS, and PC respectively. After binding the device in this way, the USB cable must be connected to the host and the mobile phone, and it cannot be used without the USB cable. Disconnect the USB cable and the device will lose connection.
2: Configure wifi or hotspot binding through the USB cable. The binding process of this method requires a USB connection, and then enter the wifi or hotspot name and password to complete the binding. After binding, you can unplug the USB cable and use it wirelessly.
3: Configure wifi or hotspot binding through the Bluetooth of the mobile phone. This method is the same as the binding method of the 1st generation host. Wireless use after binding.
Operating system:
IOS: iPhone/iPad/MAC
- System Version: 9.0 or above
- Cell Phone Models: iPhone 6 or above
- Running Memory Ram: >2G
- Storange Space rom: >1.5G
Go to iOS App Store, search 'ACDP' to download App
Android: HUAWEI, Xiaomi, OPPO, Samsung etc Qualcomm chipset mobile phones
- System Version: 5.0 or Above
- Running Memory Ram: >2G
- Storage Space Rom: >1.5G
PC Version: (
Windows 7 and Windows 10), does not support WinXP or Win11
- System Version: 5.0 or above
- Cell Phone Models: iPhone 6 or above
- Running Memory Ram: >2G
- Storage Space Rom: >1.5G
ICP: Memory and MCU programming In Circuits
MCU programming in Circuits
Yanhua Mini ACDP 2 Package List:
1pc x ACDP 2 Programmer
1pc x Puncture Socket (With one more plastic part)
1pc x BAV-KEY adapter
1pc x P8P Cable
1pc x 8P Cable
1pc x 20P Cable
1pc x 20P to 8P cable
1pc x Android cable
1pc x IOS cable
1pc x USB cable
1pc x OBD cable
1pc x 14V Switch Power Supply
4pcs x Test Points cleaning probes
1pc x Double-head line